Projects of all kinds including Web, restoration, audio, hobby, woodworking, and much more.
I recently acquired a rather nice TEAC A-4010S tape machine. It was reported to be in good condition, and it was. However, when I tried playing a commercially recorded music tape, the tape broke. This sort of thing is not uncommon with vintage tapes because they become brittle with age. …
The Denon DN-T620 is a professional CD and cassette machine manufactured from the late 1990s to early 2000s. The one you see here has a build date of 1999. As a professional model it came with rack brackets standard. The power cord itself is a give-away as to its intent. …
I recently found this Denon DN-T620 studio CD/Cassette machine. I wasn’t sure if it would work because it was a mess. Check out this video and see the machine in action.
The Sony TC-355 reel-to-reel machine that was featured in the last post not only has been working great, but it has been a knockout. It has been playing commercially available music tapes, a big deal up until the late 1970s and, more importantly, the early 1980s when CDs. Came out. …
After cleaning, re-lubrication, and adjustment the Sony TC-355 reel-to-reel tape recorder was ready to go. Take a listen right here on YouTube – https://www.youtube.com/watch?v=LF7lvPIWUlE
In the last two posts we have been looking at a very cool Sony TC-355 reel-to-reel tape machine that is in desperate need of repair. While the backward function worked, the forward and fast forward functions did not. Now we will see about the fix. Once the internal components were …
In the last post we took a look at a Sony TC-355 that I recovered from the recycle pile. After a thorough cleaning we were able to test it. Unfortunately, only the rewind function worked correctly, and it was obviously necessary to get inside the machine. Here is what we …
I ran across this Sony TC-355 reel-to-reel tape machine. It had been discarded and was covered in a layer of dirt and, I think, nicotine. I figured that even if there was a slight chance of rescuing the machine it would be worth the effort. Anyway, I dragged it home …
With the old foam surrounds removed and the speaker frames and cones cleaned up, the next step was to install the new foams following the SimpleSpeakers.com instructions. NOTE: Remember, I am not a technician. These posts only describe my adventures. If you try this stuff yourself, you should consult and …
In the previous post I described finding that the foams in a pair of Boston A70 speakers were bad. In this post I will describe how I removed the old foam. NOTE: I am not a technician and these posts should not be considered “how-to” advice. They are nothing more …
