Projects of all kinds including Web, restoration, audio, hobby, woodworking, and much more.
In the previous two posts we investigated a JVC XL-R302BK CD player that was not working. It turns out that the belt was too old and slippery. A replacement belt was installed and the player reassembled. The result was total success. Here is a demonstration of the player in action.
As you probably recall, in the last post I discussed a JVC XL-R302BK CD player that was not operating correctly. Apparently, when the player is turned on the carousel rotates and the machine finds a proper “start point”, for lack of a better term. This is not unusual. Many other …
I acquired this JVC XL-R302BK 5-disc CD changer recently. It seems that it does not work for some reason. A little investigation should tell us something more.
After a fair bit of work, the Pioneer PD-M410 is ready to be tested! The final steps were to put the case back on, secure the power cord strain relief, and load the cartridge. On the right you can see what the cartridge looks like as it is being pushed, …
If you have been following the past several posts you know that I have been working on a Pioneer PD-M410 CD player. In the last post it was noted that the lens for the laser pickup was missing. Sure enough, by turning the CD player upside down and shaking gently …
From the previous post you know that the first music test did not go well with the Pioneer PD-M410. What happened is that the machine moved the disc from the cartridge into the CD mechanism. The mechanism did not spin the CD. Notice in the photo that the inside of …
The Pioneer PD-M510 CD player uses a 6-disc cartridge as you can see in the above photo. I added three discs and inserted the “cart” into the player. Bad luck, nothing played. The machine pulled the CD into position, and then zip! What’s up with that? There’s an old saying, …
The first major step in the repair of the Pioneer PD-M410 was to install a new power cord. It just so happened that I had a legit power cord ready to go. I removed to remnants of the original cord and saved the strain relief. Then I threaded the new …
As mentioned in the previous post, somebody cut the power cord off of the Pioneer PD-M410 that I acquired. The next step will be to take a look inside. If luck is available, the only problem could be a blown fuse! This is where the mains power cord comes into …
I picked up this Pioneer PD-M410 CD player the other day. It was rather dusty, but otherwise in decent condition except that the cord had been cut. In my experience, a cut cord usually means that the device does not work. If it does not work, could it be repaired? …
